Dismiss Notice

Register now to be one of the first members of this SharePoint Community! Click here it just takes seconds!

Dismiss Notice
Welcome Guest from Country Flag

Implementing GlusterFS on Azure (HPC Scalable Parallel File System)

Discussion in 'Official Microsoft News' started by Ed Price - MSFT, Mar 31, 2017.

Thread Status:
Not open for further replies.
  1. Ed Price - MSFT

    Ed Price - MSFT Guest

    Blog Posts:
    0
    Authored by Rakesh Patil (AzureCAT). Edited by Nanette Ray and RoAnn Corbisier.

    Introduction

    Recently, the Azure team worked with a customer to set up GlusterFS, a free, scalable, open source distributed file system that works great for applications hosted on Microsoft Azure. Like our customer, you too can make the most of common, off-the-shelf hardware by using GlusterFS to create large, distributed storage solutions.

    In this article, we introduce some key concepts of the GlusterFS file system and its underlying components, then show how to use the Gluster command line to create various types of volumes for your Azure solution as a shared file system. A template is available to help you get started as well.

    GlusterFS overview


    GlusterFS is a scalable distributed network file system that runs in user space using Filesystem in Userspace (FUSE) libraries. GlusterFS is the file system for Gluster storage, which provides a flexible file services layer for users and applications that can be easily scaled to adjust to your workloads. GlusterFS is often used for media streaming, data analysis, and other data-heavy, bandwidth-intensive tasks. You can deploy it on virtual or physical servers on premises or in the cloud.

    Deployment flexibility is a key strength of Gluster storage. It’s suitable for large static files that don’t change, such as media files, document assets, and images. We found that large, immutable (write once, never change) files are a good fit for GlusterFS. These benefits are also what made GlusterFS a good fit for our customer.

    NFS is considered single point of failure in the architecture, but for high availability, you can use Cluster Trivial Database (CTDB) technology with NFS (out of scope for this document). The BeeGFS and Ceph storage systems are also being used currently as distributed parallel file systems in Azure HPC solutions. Later in this article, we discuss some improvements to small file performance and metadata-intensive workloads.

    Gluster storage architecture


    In a scale out system, one of the biggest challenges is keeping track of the logical and physical locations of data and metadata. Unlike other traditional storage solutions, Gluster storage doesn’t need a metadata server and locates files algorithmically using an elastic hashing algorithm. This no-metadata server architecture ensures better performance, linear scalability, and reliability.

    [​IMG]

    Figure 1. GlusterFS design for Azure.

    Storage concepts


    We recommend that you become familiar with the GlusterFS documentation, but to get started, you ‘ll need to know at least the following terms:

    • Brick: The GlusterFS basic unit of storage, represented by an export directory or a mount point on a server in the trusted storage pool.
    • Trusted storage pool: A collection of shared files and directories based on the designed protocol.
    • Block storage: Devices through which the data is being moved across systems in the form of blocks.
    • Cluster: In Gluster storage, both cluster and trusted storage pool convey the same meaning, the collaboration of storage servers based on a defined protocol.
    • Distributed file system: A file system in which data is spread over different nodes, allowing users to access a file without knowing its location. Data sharing among multiple locations is fundamental to all distributed file systems.
    • FUSE: A loadable kernel module that allows users to create file systems above the kernel level, no kernel code is involved. The FUSE module acts as a bridge to the kernel interfaces.
    • Glusterd: The GlusterFS management daemon and file system backbone that runs whenever the servers are in an active state.
    • POSIX: Portable Operating System Interface (POSIX), the family of standards defined by the IEEE as a solution to the compatibility between Unix variants in the form of an API.
    • Subvolume: A brick after being processed by least at one translator.
    • Translator: A piece of code that performs the basic actions initiated by a user from the mount point. It connects one or more subvolumes.
    • Volume: A logical collection of bricks. All the operations are based on the different types of volumes created by a user.
    • Metadata: Data providing information about other pieces of data.
    • Client: The machine (or server) that mounts a volume.
    Key features


    In our customer deployments, we use GlusterFS with Azure applications for the following reasons:

    • Elasticity: Volumes can be grown, reduced, or migrated across systems in a trusted storage pool. Also, servers can be added or removed when required with data rebalanced. File system configuration changes and performance-tuning parameters can be set on the fly to allow changes dynamically.
    • No metadata: Gluster stores and locates data using an elastic hash algorithm and doesn’t need any metadata servers, so I/O bottlenecks are removed, which improves performance and parallel access.
    • Scalability: Gluster storage is designed to scale for both capacity and performance.
    • High availability: Synchronous file replication ensures high data availability. Disaster recovery and resiliency across regions is provided by asynchronous geo-replication.
    • Ease of use: You can use simple, single commands for storage management. Performance monitoring and analysis tools such as Top and Profile are also included.
    Types of volumes


    When you set up GlusterFS, you need to specify the type of storage volumes you need. The type you choose depends on your workload and the tradeoff between data protection and capacity. In our typical Azure deployments, we rely on both distributed and distributed-replicated volumes.

    • Distributed volume, the default type, spreads files across the bricks in the volume. It doesn’t provide redundancy, but it’s easy and inexpensive to scale the volume size. The downside is that a brick failure leads to complete data loss, and you must rely on the underlying hardware for data loss protection.

    [​IMG]

    Figure 2. Distributed volume setup with GlusterFS.

    • Replicated volume creates copies of files across multiple bricks in the volume. Use replicated volumes in environments where high availability and high reliability are critical. You must set a client-side quorum on replicated volumes to prevent split-brain scenarios.

    [​IMG]

    Figure 3. Replicated volume setup with GlusterFS.

    • Distributed-replicated volume provides node-level fault tolerance but less capacity than a distributed volume. Use distributed-replicated volumes in environments where the critical requirements are to scale storage and maintain high reliability. Distributed-replicated volumes also offer improved read performance in most environments.

    [​IMG]

    Figure 4. Distributed-replicated volume setup with GlusterFS.

    • Dispersed volume is based on erasure coding (EC). In this method of data protection, data is broken into fragments, expanded, and encoded with redundant data pieces, then stored across a set of different locations.

    [​IMG]

    Figure 5. Dispersed volume setup with GlusterFS.

    Set up GlusterFS


    To get started, you need at least the following:

    • Minimum of two nodes of any Linux distribution.
    • Two CPUs, 2 GB RAM, and 1 GbE (the minimum specification).
    • A working network connection.
    • At least two virtual disks, one for the operating system installation and one to serve as GlusterFS storage. This setup emulates a real-world deployment, where you would want to separate GlusterFS storage from the operating system installation.

    NOTE: Make sure you have enough space for the dynamically generated configuration files that GlusterFS creates and stores in /var/lib/glusterd. Either keep enough space for /var file system, or have /var configured on different partition.

    • For testing, you can use a resource disk on an Azure VM, but we recommend using standard or premium attached disks for production use.
    • We created all Gluster servers and Gluster client VMs in a single virtual network that allowed all traffic, and we disabled SElinux and FirewallD. Later in this article, we provide detailed instructions about the ports to open.

    GlusterFS can be installed on any Linux distribution. In this article, we discuss RHEL (Red Hat Enterprise Linux) a bit, then CentOS, because you need Resilient Storage Add-On software from Red Hat to install Gluster on RHEL machines. On CentOS, you can directly install the upstream version of the software from the Gluster repository.

    Deploy the Gluster storage instances


    In Azure, you can configure individual Gluster storage instances into a cluster. In this example, we set up four instances named glusterserver1-4.

    Their IP addresses are 10.3.0.4 to 10.3.0.7.

    Instances are added to availability set – gfstestavtest. When Gluster storage replicates data among bricks, you must associate the replica sets with a specific availability set. By using availability sets in the replication design, incidents within the Azure infrastructure won’t affect all members of a replica set simultaneously.

    Check the ports


    Before installing GlusterFS, make sure that the firewall settings don’t prevent access to the ports used by the Gluster nodes. By default, Glusterd listens on TCP/24007 but opening that port is not enough on the Gluster nodes. Each time you add a brick , it opens a new port that you can see with gluster volumes status.

    Firewall configuration tools differ between RHEL/CentOS 6 and 7 as follows:

    • RHEL/CentOS 6:

    [​IMG]

    • RHEL/CentOS 7:
    • Or:

    However, if the default ports are already in use, you can open a specific port with the following command:

    Or:

    Install GlusterFS on CentOS 7


    The following instructions install and set up GlusterFS on Azure VMs:

    [[email protected] ~]# yum install centos-release-gluster
    Loaded plugins: fastestmirror, langpacks

    base | 3.6 kB 00:00:00
    extras | 3.4 kB 00:00:00
    openlogic | 2.9 kB 00:00:00

    updates | 3.4 kB 00:00:00
    (1/5): base/7/x86_64/group_gz | 155 kB 00:00:00
    (2/5): openlogic/7/x86_64/primary_db | 15 kB 00:00:00
    (3/5): extras/7/x86_64/primary_db | 138 kB 00:00:00
    (4/5): base/7/x86_64/primary_db | 5.6 MB 00:00:00
    (5/5): updates/7/x86_64/primary_db | 3.8 MB 00:00:00

    Determining fastest mirrors

    Resolving Dependencies

    --> Running transaction check
    ---> Package centos-release-gluster310.noarch 0:1.0-1.el7.centos will be installed
    --> Processing Dependency: centos-release-storage-common for package: centos-release-gluster310-1.0-1.el7.centos.noarch
    --> Running transaction check
    ---> Package centos-release-storage-common.noarch 0:1-2.el7.centos will be installed
    --> Finished Dependency Resolution

    Dependencies Resolved

    ==================================================================================================================
    Package Arch Version Repository Size
    ==================================================================================================================

    Installing:
    centos-release-gluster310 noarch 1.0-1.el7.centos extras 4.2 k

    Installing for dependencies:
    centos-release-storage-common noarch 1-2.el7.centos extras 4.5 k
    [[email protected] ~]# yum install glusterfs-cli glusterfs-geo-replication glusterfs-fuse glusterfs-server glusterfs
    Dependencies Resolved

    ==================================================================================================================
    Package Arch Version Repository Size
    ==================================================================================================================

    Installing:

    glusterfs x86_64 3.10.0-1.el7 centos-gluster310 526 k

    glusterfs-cli x86_64 3.10.0-1.el7 centos-gluster310 193 k

    glusterfs-fuse x86_64 3.10.0-1.el7 centos-gluster310 135 k

    glusterfs-geo-replication x86_64 3.10.0-1.el7 centos-gluster310 221 k

    glusterfs-server x86_64 3.10.0-1.el7 centos-gluster310 1.3 M

    Installing for dependencies:

    glusterfs-api x86_64 3.10.0-1.el7 centos-gluster310 92 k

    glusterfs-client-xlators x86_64 3.10.0-1.el7 centos-gluster310 812 k

    [[email protected] ~]# systemctl enable glusterd.service

    Created symlink from /etc/systemd/system/multi-user.target.wants/glusterd.service to /usr/lib/systemd/system/glusterd.service.

    [[email protected] ~]# systemctl enable glusterfsd.service

    Created symlink from /etc/systemd/system/multi-user.target.wants/glusterfsd.service to /usr/lib/systemd/system/glusterfsd.service.

    [[email protected] ~]# systemctl start glusterd.service

    [[email protected] ~]# systemctl start glusterfsd.service

    [[email protected] ~]# systemctl status glusterfsd.service

    ? glusterfsd.service - GlusterFS brick processes (stopping only)

    Loaded: loaded (/usr/lib/systemd/system/glusterfsd.service; enabled; vendor preset: disabled)

    Active: active (exited) since Thu 2017-03-09 09:05:07 UTC; 8s ago

    Process: 43749 ExecStart=/bin/true (code=exited, status=0/SUCCESS)

    Main PID: 43749 (code=exited, status=0/SUCCESS)

    Mar 09 09:05:07 glusterserver1 systemd[1]: Starting GlusterFS brick processes (stopping only)...

    Mar 09 09:05:07 glusterserver1 systemd[1]: Started GlusterFS brick processes (stopping only).

    [[email protected] ~]# systemctl status glusterd.service

    ? glusterd.service - GlusterFS, a clustered file-system server

    Loaded: loaded (/usr/lib/systemd/system/glusterd.service; enabled; vendor preset: disabled)

    Active: active (running) since Thu 2017-03-09 09:05:00 UTC; 20s ago

    Process: 43554 ExecStart=/usr/sbin/glusterd -p /var/run/glusterd.pid --log-level $LOG_LEVEL $GLUSTERD_OPTIONS (code=exited, status=0/SUCCESS)

    Main PID: 43555 (glusterd)

    CGroup: /system.slice/glusterd.service

    +-43555 /usr/sbin/glusterd -p /var/run/glusterd.pid --log-level INFO

    Mar 09 09:04:58 glusterserver1 systemd[1]: Starting GlusterFS, a clustered file-system server...

    Mar 09 09:05:00 glusterserver1 systemd[1]: Started GlusterFS, a clustered file-system server.

    [[email protected] ~]#



    Install GlusterFS on RHEL 7


    To set up RHEL 7, register the system with Subscription Manager, identify available entitlement pools, and attach the entitlement pools to the system.

    Use the pool identifiers to attach the Red Hat Enterprise Linux Server and Red Hat Gluster Storage entitlements to the system. Run the following command to attach the entitlements:

    Start and enable Gluster services


    Next we get the glusterd service going:

    Set up a trusted storage pool


    Before you can set up a GlusterFS volume, you must create a trusted storage pool. On glusterserver1:

    [[email protected] ~]# for i in 2 3 4; do gluster peer probe glusterserver$i ; done

    peer probe: success.

    peer probe: success.

    peer probe: success.

    [[email protected] ~]# gluster peer status

    Number of Peers: 3

    Hostname: glusterserver2
    Uuid: def7c4cd-f875-46ff-a93d-f8f1c059ceb7
    State: Peer in Cluster (Connected)

    Hostname: glusterserver3
    Uuid: f6f2c4c8-38d7-405a-a8b7-774df2bff4be
    State: Peer in Cluster (Connected)

    Hostname: glusterserver4
    Uuid: 1e704349-7c20-4b4d-83b5-41cd664472d0
    State: Peer in Cluster (Connected)



    Set up software RAID


    On all servers participating in the Gluster cluster, we want to create bricks out of disks put together using Linux software RAID as it provides better performance than directly using logical volume manager (LVM) volumes.

    [[email protected] ~]# mdadm --create md0 --level=0 --chunk=256K --raid-devices=4 /dev/sdc /dev/sdd /dev/sde /dev/sdf
    mdadm: Defaulting to version 1.2 metadata
    mdadm: array /dev/md/md0 started.

    [[email protected] ~]# cat /proc/mdstat
    Personalities : [raid0]
    md127 : active raid0 sdf[3] sde[2] sdd[1] sdc[0]
    419168256 blocks super 1.2 256k chunks
    unused devices: <none>

    [[email protected] ~]# mdadm --examine --scan | sudo tee /etc/mdadm.conf
    ARRAY /dev/md/md0 metadata=1.2 UUID=27958936:396b9ea2:978e91ab:8d6d0faf name=glusterserver1:md0



    Set up thinly provisioned LVM volumes


    Since all four servers will be a part of Gluster’s trusted storage pool, it’s a good idea to have similarly configured bricks on each. The example shows how to create thinly provisioned LVM volumes on top of software RAID. Thin provisioning helps optimize available of space. So, on each server in the cluster, do the following:

    [[email protected] ~]# pvcreate --dataalignment 1024K /dev/md/md0

    Physical volume "/dev/md/md0" successfully created.

    [[email protected] ~]# pvscan

    PV /dev/md127 lvm2 [399.75 GiB]

    Total: 1 [399.75 GiB] / in use: 0 [0 ] / in no VG: 1 [399.75 GiB]




    [[email protected] ~]# vgcreate --physicalextentsize 256K rhgs-data /dev/md/md0

    Volume group "rhgs-data" successfully created

    [[email protected] ~]# vgscan

    Reading volume groups from cache.

    Found volume group "rhgs-data" using metadata type lvm2




    [[email protected] ~]# lvcreate -L 390g -T rhgs-data/brickpool -c 256K

    Using default stripesize 64.00 KiB.

    Logical volume "brickpool" created.

    [[email protected] ~]# lvscan

    inactive '/dev/rhgs-data/lvol0' [975.00 MiB] inherit

    ACTIVE '/dev/rhgs-data/brickpool' [390.00 GiB] inherit

    [[email protected] ~]# lvchange --zero n rhgs-data/brickpool

    Logical volume rhgs-data/brickpool changed.

    [[email protected] ~]# lvscan

    inactive '/dev/rhgs-data/lvol0' [975.00 MiB] inherit

    ACTIVE '/dev/rhgs-data/brickpool' [390.00 GiB] inherit

    [[email protected] ~]# lvcreate -V 380g -T rhgs-data/brickpool -n brick1

    Using default stripesize 64.00 KiB.

    Logical volume "brick1" created.

    [[email protected] ~]# lvscan

    inactive '/dev/rhgs-data/lvol0' [975.00 MiB] inherit

    ACTIVE '/dev/rhgs-data/brickpool' [390.00 GiB] inherit

    ACTIVE '/dev/rhgs-data/brick1' [380.00 GiB] inherit



    Create the file system and mount point to mount the brick


    On each server, create the file system and mount point:

    [[email protected] ~]# mkfs.xfs -f -K -i size=512 -n size=8192 /dev/rhgs-data/brick1
    meta-data=/dev/rhgs-data/brick1 isize=512 agcount=16, agsize=6225856 blks
    = sectsz=4096 attr=2, projid32bit=1
    = crc=1 finobt=0, sparse=0
    data = bsize=4096 blocks=99613696, imaxpct=25
    = sunit=64 swidth=256 blks
    naming =version 2 bsize=8192 ascii-ci=0 ftype=1
    log =internal log bsize=4096 blocks=48639, version=2
    = sectsz=4096 sunit=1 blks, lazy-count=1
    realtime =none extsz=4096 blocks=0, rtextents=0

    [[email protected] ~]# mkdir -p /rhs/brick1
    Mount the file system


    Next, mount the file system on the mount point and add the entry to the fstab file:

    [[email protected] ~]# echo -e "/dev/rhgs-data/brick1t/rhs/brick1txfstdefaults,inode64,nobarrier,noatime,nouuid 0 2" | sudo tee -a /etc/fstab
    /dev/rhgs-data/brick1 /rhs/brick1 xfs defaults,inode64,nobarrier,noatime,nouuid 0 2
    [[email protected] ~]# mount -a
    [[email protected] ~]# df -h
    Filesystem Size Used Avail Use% Mounted on
    /dev/sda2 30G 1.3G 29G 5% /
    devtmpfs 3.4G 0 3.4G 0% /dev
    tmpfs 3.5G 0 3.5G 0% /dev/shm
    tmpfs 3.5G 41M 3.4G 2% /run
    tmpfs 3.5G 0 3.5G 0% /sys/fs/cgroup
    /dev/sda1 497M 62M 436M 13% /boot
    /dev/sdb1 14G 41M 13G 1% /mnt/resource
    tmpfs 697M 0 697M 0% /run/user/1000
    /dev/mapper/rhgs--data-brick1 380G 33M 380G 1% /rhs/brick1
    Set up the Gluster volume


    After the bricks are in place, you can create a GlusterFS volume. The volume combines the capacity from each node. In this example, we create the two most common volume types, distributed and distributed-replicated. A distributed volume has no fault tolerance but has the maximum capacity. A distributed-replicated volume has node-level fault tolerance but has reduced capacity.

    Create a distributed volume


    In this example, we set up a distributed volume as follows:

    [[email protected] ~]# gluster vol create dist-vol glusterserver1:/rhs/brick1/dist-vol glusterserver2:/rhs/brick1/dist-vol glusterserver3:/rhs/brick1/dist-vol glusterserver4:/rhs/brick1/dist-vol

    volume create: dist-vol: success: please start the volume to access data




    [[email protected] ~]# gluster volume info

    Volume Name: dist-vol

    Type: Distribute

    Volume ID: 3b9b2208-c530-40d3-8d8e-b6806852f986

    Status: Created

    Snapshot Count: 0

    Number of Bricks: 4

    Transport-type: tcp

    Bricks:

    Brick1: glusterserver1:/rhs/brick1/dist-vol

    Brick2: glusterserver2:/rhs/brick1/dist-vol

    Brick3: glusterserver3:/rhs/brick1/dist-vol

    Brick4: glusterserver4:/rhs/brick1/dist-vol

    Options Reconfigured:

    transport.address-family: inet

    nfs.disable: on



    Next, start the volume:

    [[email protected] ~]# gluster volume start dist-vol
    volume start: dist-vol: success

    [[email protected] ~]# gluster volume info
    Volume Name: dist-vol
    Type: Distribute
    Volume ID: 3b9b2208-c530-40d3-8d8e-b6806852f986
    Status: Started
    Snapshot Count: 0
    Number of Bricks: 4
    Transport-type: tcp

    Bricks:
    Brick1: glusterserver1:/rhs/brick1/dist-vol
    Brick2: glusterserver2:/rhs/brick1/dist-vol
    Brick3: glusterserver3:/rhs/brick1/dist-vol
    Brick4: glusterserver4:/rhs/brick1/dist-vol
    Options Reconfigured:
    transport.address-family: inet
    nfs.disable: on
    Create a distributed-replicated volume


    When you set up a distributed-replicated volume, it’s critical to specify the bricks in the right order for data protection. The number of bricks must be a multiple of the replica count for a distributed-replicated volume. Each replica_count of consecutive bricks will form a replica set, with all replica sets combined into a distribute set. To ensure that replica-set members aren’t placed on the same node, list the first brick on every server, then the second brick on every server in the same order, and so on.

    [[email protected] /]# gluster vol create repl-vol replica 2 glusterserver1:/rhs/brick1/repl-vol glusterserver2:/rhs/brick1/repl-vol glusterserver3:/rhs/brick1/repl-vol glusterserver4:/rhs/brick1/repl-vol force
    volume create: repl-vol: success: please start the volume to access data

    [[email protected] /]# gluster volume info
    Volume Name: repl-vol
    Type: Distributed-Replicate
    Volume ID: 72260bf9-381f-4c08-8ee1-d4979f04e1f0
    Status: Created
    Snapshot Count: 0
    Number of Bricks: 2 x 2 = 4
    Transport-type: tcp

    Bricks:
    Brick1: glusterserver1:/rhs/brick1/repl-vol
    Brick2: glusterserver2:/rhs/brick1/repl-vol
    Brick3: glusterserver3:/rhs/brick1/repl-vol
    Brick4: glusterserver4:/rhs/brick1/repl-vol
    Options Reconfigured:
    transport.address-family: inet
    nfs.disable: on

    [[email protected] /]# gluster volume start repl-vol
    volume start: repl-vol: success
    Access volume from clients


    Gluster storage volumes can be accessed using a machine installed with one of the following protocols:

    • Native Client (the FUSE-based client used in our example)
    • NFS
    • Samba

    The following table shows which of the supported access protocols work with TCP and RDMA.

    Protocol Supports TCP? Supports RDMA?
    FUSE
    [​IMG] [​IMG]
    SMB [​IMG]
    NFS [​IMG] [​IMG]



    Install Native Client


    Native Client is a user-mode, FUSE-based client that provides high concurrency and fast writes.

    On the client, install the FUSE package as follows:

    [[email protected] ~]# yum install glusterfs-fuse
    Loaded plugins: fastestmirror, langpacks
    Loading mirror speeds from cached hostfile

    Resolving Dependencies
    --> Running transaction check
    ---> Package glusterfs-fuse.x86_64 0:3.7.9-12.el7.centos will be installed
    --> Processing Dependency: glusterfs-client-xlators(x86-64) = 3.7.9-12.el7.centos for package: glusterfs-fuse-3.7.9-12.el7.centos.x86_64
    --> Processing Dependency: glusterfs(x86-64) = 3.7.9-12.el7.centos for package: glusterfs-fuse-3.7.9-12.el7.centos.x86_64
    --> Processing Dependency: libglusterfs.so.0()(64bit) for package: glusterfs-fuse-3.7.9-12.el7.centos.x86_64
    --> Processing Dependency: libgfxdr.so.0()(64bit) for package: glusterfs-fuse-3.7.9-12.el7.centos.x86_64
    --> Processing Dependency: libgfrpc.so.0()(64bit) for package: glusterfs-fuse-3.7.9-12.el7.centos.x86_64
    --> Running transaction check
    ---> Package glusterfs.x86_64 0:3.7.9-12.el7.centos will be installed
    ---> Package glusterfs-client-xlators.x86_64 0:3.7.9-12.el7.centos will be installed
    ---> Package glusterfs-libs.x86_64 0:3.7.9-12.el7.centos will be installed
    --> Finished Dependency Resolution

    Dependencies Resolved

    ==================================================================================================================
    Package Arch Version Repository Size
    ==================================================================================================================

    Installing:
    glusterfs-fuse x86_64 3.7.9-12.el7.centos base 109 k

    Installing for dependencies:
    glusterfs x86_64 3.7.9-12.el7.centos base 462 k
    glusterfs-client-xlators x86_64 3.7.9-12.el7.centos base 837 k
    glusterfs-libs x86_64 3.7.9-12.el7.centos base 331 k

    Transaction Summary
    Set up the mount point


    Next, create the directory that serves as a mount point for the Gluster volumes:

    [[email protected] ~]# mkdir /mnt/gluster



    Now mount the volume on the client at the specified mount point:

    [[email protected] ~]# mount -t glusterfs glusterserver1:/dist-vol /mnt/gluster



    The server specified in the mount command is used to fetch the GlusterFS configuration volfile, which describes the volume name. The client then communicates directly with the servers listed in the volfile (which may not actually include the server used for mount).

    You can specify the following mount options:

    • backup-volfile-servers=<volfile_server2>:<volfile_server3>:…:<volfile_serverN>
    • List of the backup volfile servers to mount the client. If this option is specified while mounting the FUSE client, when the first volfile server fails, the servers specified in backup-volfile-servers option are used as volfile servers to mount the client until the mount is successful.
    Troubleshoot failures and performance


    GlusterFS is great for cloud storage, but it does have some known issues. Maybe you’re seeing I/O errors or a slowdown in performance. To help with your recovery and tuning efforts, the following sections discuss a couple of workarounds and configuration tweaks that you can use with GlusterFS.

    Resolve split-brain issues


    The term split brain applies to Gluster volumes in a replicated volume configuration. A file is said to be in split brain when copies of the same file in different bricks that constitute the replica pair have mismatching data or metadata contents. When the copies conflict with each other, automatic healing isn’t possible.

    When a split brain occurs, applications can’t perform certain operations like read and write on the file. When an application tries to access split-brain files, an I/O error results.

    Three types of split brains can occur:

    • Data split brain: Contents of a file under split brain differ in different replica pairs and automatic healing isn’t possible.
    • Metadata split brain: The metadata of the files (for example, user defined extended attribute) don’t match and automatic healing isn’t possible.
    • Entry split brain: A file has different gfids on each replica pair.

    The only way to resolve split brains is by manually inspecting the file contents from the back end and deciding which is the true copy (source), then modifying the appropriate extended attributes so healing can happen automatically.

    Configure the server-side quorum


    To help mitigate data inconsistency, you can configure a quorum on the trusted server pool and enforce it on the server and client. This quorum is on the server side, that is, the Glusterd service. Whenever the Glusterd service on a GlusterFS server observes that the quorum isn’t met, it brings down the bricks to prevent data split brain.

    You can configure the quorum percentage ratio for a trusted storage pool. If the percentage ratio of the quorum isn’t met due to network outages, the bricks of the volume participating in the quorum in those nodes are taken offline. By default, the quorum is met if the percentage of active nodes is more than 50 percent of the total storage nodes.

    For a replicated volume with two nodes and one brick on each machine, if the server-side quorum is enabled and one of the nodes goes offline, the other node is also taken offline because of the quorum configuration. As a result, the high availability provided by the replication is ineffective. To prevent this situation, it’s recommended to add a dummy node to the trusted storage pool that doesn’t contain any bricks.

    Configure the client-side quorum


    Another way to minimize split-brain data loss is to implement a client-side quorum. The client-side quorum determines the number of bricks that must be up before data modification is allowed. In a two-node replicated configuration, it’s typically set to 51 percent. If the client-side quorum is not met, files in that replica group become read only.

    [​IMG]

    Figure 6. Client-side quorum configuration.

    In the figure above, when the client side quorum is not met, servers in a replicated group (Subvolume A) become inactive, while Subvolume B continues to function normally.

    Improve small file performance


    Gluster is known to perform poorly for small files and metadata-intensive workloads and even worse when hardware such as SSDs and InfiniBand are used. The reason for this performance lag is network overhead caused while fetching files and directory metadata, called lookup. With large files, the cost of lookups is significantly less than the transfer time improvements, but for small files, the problems with lookups amplify greatly. For more information about how the path traversal problem works, see Dan Lambright’s great explanation on the Gluster Community blog.

    To cope with this lookup amplification, you can adjust some throughput configurations. One way is to improve Gluster’s metadata cache translator (md-cache), so the stat information lookup requests are cached indefinitely on the client. This solution requires client-side cache entries to be invalidated if another client modifies a file or directory. The invalidation mechanism is called an upcall. With upcalls enabled, the Gluster profile shows that the number of lookups drops to a negligible number on all subvolumes. This drop translates directly to better throughput for small file workloads.

    To enable upcall in md-cache, specify the following:

    $ gluster volume set <volname> features.cache-invalidation on​

    $ gluster volume set <volname> features.cache-invalidation-timeout 600​

    $ gluster volume set <volname> performance.stat-prefetch on​

    $ gluster volume set <volname> performance.cache-samba-metadata on​

    $ gluster volume set <volname> performance.cache-invalidation on​

    $ gluster volume set <volname> performance.md-cache-timeout 600​

    $ gluster volume set <volname> network.inode-lru-limit: <big number here>​

    In this example, you can use something like 90,000 for inode-lru-limit.

    Another way to tune performance is to consider the impact from so-called negative lookups, which happen when looking for an entry that doesn’t exist in a volume. Any file system’s performance can suffer when negative entries exist. Typically, file creation operations also slow down to search for the file in all subvolumes. Negative lookups really impact small file performance, where a large number of files are being added and created in quick succession to a volume.

    To improve performance, you can set a flag that disables the negative lookup fan-out behavior for the same volume in a balanced volume set:

    $ gluster volume set VOLNAME cluster.lookup-optimize <on/off>​

    Next steps


    The recommended way to deploy Azure resources is with a template. To quickly set up a working Gluster volume on Azure, you can use the Quickstart template contributed by the Azure community.

    NOTE: Before using this template, consider the following issues we encountered:

    • The path to fetch the Gluster packages is no longer valid for CentOS. We haven’t tested for Ubuntu yet.
    • The template uses CentOS 6.5 to create servers, and later upgrades to 6.8 via a yum update. You can also modify the template to use CentOS 7.
    • The template doesn’t use managed disks but can be updated to take advantage of them.

    This template is available from GitHub.

    Summary


    You can install Gluster storage and GlusterFS in your on-premises infrastructure (physical or virtual) or in the cloud. Doing so can help make sure your data is redundant, failproof, and performance oriented. You can also implement asynchronous geo-replication for disaster recovery.

    For more information, refer to the Gluster website.

    Continue reading...
     
Thread Status:
Not open for further replies.

Share This Page

LiveZilla Live Chat Software